Artificial Grass DIY

Part 1

This is Part 1 of our Artificial Grass DIY Installation Guide.

Part 1  /  Part 2  /  Part 3

Calculate your Area

Measure

Sketch your area and note all perimeter measurements. Determine how many square metres your area is.  This will tell you how many cubic metres of cracker dust you may need, roughly how much sand will need to be removed, and how much infill sand to apply after the artificial grass is installed.

Determine what lengths of artificial grass you will need to cover your area, squaring off sections that are not at a right angle. Keep pieces running in the same direction and find out the available roll widths for your choice of artificial grass. Factor in additional width and length to allow for cutting in your artificial grass to fit your area.

Tip: Artificial grass is directional, meaning that the way it is manufactured (the grass yarn is stitched into the backing) requires any joining lengths of artificial grass to be laid running in the same direction to look uniform and blend together. The ideal viewing angle for artificial grass is looking into the blades, rather than across the back of the blades.

Next is Part 2 of our DIY Installation Guide

Read Part 2
DIY Artificial Grass Perth

DIY Artificial Grass
from only $22/sqm

Tauro Turf can supply you with everything you need for DIY synthetic turf in Perth.

Free Quote